▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
 ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓████▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
 ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓██████▓█▓▓▓█▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
 ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓█▓▓▓▓▓█▓▓▓▓▓█▓▓█▓▓▓▓▓▓█▓▓▓█▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
 ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓████▓▓▓█▓▓▓█▓█▓▓▓█▓▓▓████▓▓▓████▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
 ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓███▓▓█▓▓▓▓█▓▓▓█▓█▓▓▓█▓█▓▓▓▓█▓▓▓▓▓▓█▓▓█▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
 ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓█▓▓█▓█▓▓▓▓█▓▓▓█▓█▓▓▓█▓█▓▓▓▓██████▓█▓▓▓█▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
 ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓█▓▓█▓█▓▓▓▓█▓▓▓▓█▓▓▓▓▓█▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
 ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓███▓▓█▓▓▓▓█▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓████▓▓▓██▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
 ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓█▓▓▓▓▓████▓▓▓▓▓▓▓▓██████▓█▓▓▓▓█▓▓██▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
 ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓█▓▓▓▓▓▓▓▓▓▓▓███▓▓▓█▓▓▓▓▓▓█▓▓▓▓█▓▓██▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
 ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓█▓▓▓█▓▓████▓▓▓█▓▓▓▓█▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
 ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓█▓▓▓▓▓▓█▓▓▓▓▓▓▓████▓▓▓██▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
 ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓█▓▓███▓██████▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
 ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓█▓▓▓█▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
 ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓███▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
 ▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
                     Story.............................1
                     Installation......................2
                     Getting Started...................3
                     Interface.........................4
                     Commands..........................5
                     Registration......................6

                                  Chapter One
        This program was originally written in GW-BASIC 3.22, but
 without any of the mouse support or color. I wrote it to solve my
 school geometry problems for 1992. Then, in early July 1993, my dad
 suggested that I write POWERGEO in C, which I was just gaining an
 interest in. I worked on it steadily for three days and finished my
 program. Then, seeing as I am 11 and not the worlds kid, I decided to
 distrubute GEOMETRY, as it was named then. My dad (he always gives me
 good ideas) then said that it would sell better with some flash, you
 know, colorize it, jazz it up, make it look REALLY professional. Mouse
 support was my idea. After one nights work to create a flochart, I set
 to work on what was to become POWERGEO.

                                 Chapter Two
        To install POWERGEO, type "install" followed by the complete
 path to where you want it located (EXAMPLE: install c:\edu\powergeo).
 This will copy all of the POWERGEO files to the path you specified.
 It does not matter whether or not the path exists; INSTALL will create
 it for you if it does not. Now, how to start POWERGEO.

                                 Chapter Three
        To begin POWERGEO, change directories to the POWERGEO directory,
 then type "powergeo", then press <Enter>. POWERGEO will test to see if
 you have a mouse, and if so, set up the correct cursor for your system.
 POWERGEO has three text windows. One is the Selection Window, int the
 upper-right-hand section of the screen. You are able to view your
 selections there, and press the correct key, or, if you have a mouse,
 use it to make the appropriate selection. The second is the Output
 Window. Here is where all output AND input will take place. The last is
 the Logo Window. To tell you the truth, its only purpose is to fill up
 the remaining space on the screen! The POWERGEO logo was invented to
 fill up that space when I decided that I needed SOMETHING there, and
 the word "logo" came to my mind!

                                 Chapter Four
        I already explained this in the last chapter, so forget it.
 all I have to say is that to use POWERGEO with a mouse, you need a two
 or more button mouse.

                                 Chapter Five
        Here are the keyboard commands, although it is kind of straight-
 forward:

    A. Rectangles and Parallelograms
        1. POWERGEO prompts you as always for the measurement unit(in., cm,
            etc.)
        2. POWERGEO prompts you for the Length and Width
        3. The Perimeter and Area calculations are printed.
 As for the rest, you get the idea, I am sure.

                                  Chapter Six
        To register, print out orderfrm.txt Then send completed form to:

                        REALTIME SOFTWARE
                        P.O. BOX 11
                        HOPE, RI 02831-0011

        You will be placed on our mailing list and be the first to receive
 all subsequent versions of POWERGEO, free of charge. Also, you will
 receive the latest version COLORS, an MS-DOS compatible prompt color
 changer. COLORS requires an accomplice program to operate in conditions
 under MS-DOS 5.00.